SICK MPS-C, Руководство по эксплуатации

Страница: 35 / 38

11 Technical data
11.1 Performance
Parameter Specification
Measuring range 25 mm, ± 1 mm
50 mm, ± 1 mm
100 mm, ± 1 mm
200 mm, ± 1 mm
Field strength 3 mT ... 12 mT
Resolution ≥ 50 μ m
Repeatability (at 25 °C) 1) 0.1 mm
Linearity error (at 25 °C) 2) 0.3 mm
Sampling rate 1 ms 3)
Partial stroke speed, typ. ≤ 1.5 m/s
Full stroke speed, typ. ≤ 3 m/s
Time delay before availabil‐
ity 1.5 s
1) Repeatability with magnet movement from one direction
2) Linearity error (maximum deviation) dependent on response curve and minimum deviation function
3) Only in standard operation, not in IO-Link operation
11.2 Interfaces
Parameter Specification
Outputs (analog) 1x current output, 1x voltage output
Output (digital) 1x digital switching output (pin 2)
IO-Link (v1.1), smart sen‐
sor profile 4 channels
Data storage, block parameter
BDC modes: single point mode, window mode, cylinder switch
mode, two point mode
Cycle time: min. 1 ms
11.3 Mechanics/electronics
Parameter Specification
Electrical connection
1)
PUR cable 0.3 m; M8, 4-pin or
PUR cable 0.3 m; M12, 4-pin or
PUR cable 2 m; cable outlet (open strand end)
Supply voltage (U
v
) 12 ... 30 V DC, reverse polarity protected
3)
Residual ripple (V
ss
) ≤ 10%
Power consumption (with‐
out load) P
0
= 42 mA
2)
x U
v
Voltage output (analog) 0 V ... 10 V
Current output (analog) 4 mA ... 20 mA
Digital switching output I
max
: ± 100 mA, U
out
: 0 V ≤ U
out
≤ U
V
- 2 V
Load resistance (current
output) ≤ 500 Ω 4)
Load resistance (voltage
output) ≥ 2 k Ω
TECHNICAL DATA
11
8019721.1FIH/2022-06-01 | SICK O P E R A T I N G I N S T R U C T I O N S | MPS-C 35
Subject to change without notice