SICK MPS-C, Руководство по эксплуатации

Страница: 15 / 38

6.2 Pin allocation of the connections
M8 connection
4
3
2
1
Figure 6: Pin assignment: M8-male, A-coded, 4-pin
Pin Wire color Pin assignment
1 Brown L+
2 White U
out
/I
out
3 Blue GND
4 Black Q/IO-Link
M12 connection
2 1
4
3
Figure 7: Pin assignment: M12-male, A-coded, 4-pin
Pin Wire color Pin assignment
1 Brown L+
2 White U
out
/I
out
3 Blue GND
4 Black Q/IO-Link
Cable outlet
Wire color Pin assignment
Brown L+
White U
out
/I
out
Blue GND
Black Q/IO-Link
6.3 Connecting the supply voltage
The sensor must be connected to a voltage supply with the following properties:
•
Supply voltage: DC 12 V ... 30 V (stabilized safety extra low voltage SELV as per
currently valid standard EN 60950-1)
•
Electricity source with at least 5 W power
Protecting the supply cables
To ensure protection against short-circuits/overload in the customer’s supply cables,
the conductor cross sections used must be appropriately selected and protected.
The following standards must be observed in Germany:
• DIN VDE 0100 (part 430)
• DIN VDE 0298 (part 4) and/or DIN VDE 0891 (part 1)
ELECTRICAL INSTALLATION
6
8019721.1FIH/2022-06-01 | SICK O P E R A T I N G I N S T R U C T I O N S | MPS-C 15
Subject to change without notice