manualshive.com logo in svg

SICK MITSUBISHI ELECTRIC MELSEC iQ-F FX5, Руководство пользователя, Страница: 22 / 176

Поделиться
Скачать
SICK MITSUBISHI ELECTRIC MELSEC iQ-F FX5 Скачать руководство пользователя страница 22

20

INTRODUCTION

Thank you for purchasing MELSEC iQ-F series programmable controllers.
This manual describes the handling of MELSEC iQ-F series safety extension modules.
Before using this product, please read this manual and relevant manuals carefully and develop familiarity with the 
specifications to handle the product correctly.
Please make sure that the end users read this manual.

Conditions of use for the product

Although Mitsubishi Electric has obtained the certification for Product's compliance to the international safety standards 
IEC61508 and ISO13849-1 from TUV Rheinland, this fact does not guarantee that Product will be free from any malfunction 
or failure. The user of this Product shall comply with any and all applicable safety standard, regulation or law and take 
appropriate safety measures for the system in which the Product is installed or used and shall take the second or third safety 
measures other than the Product. Mitsubishi Electric is not liable for damages that could have been prevented by compliance 
with any applicable safety standard, regulation or law.

Regarding use of this product

 • This product has been manufactured as a general-purpose part for general industries, and has not been designed or 

manufactured to be incorporated in a device or system used in purposes related to human life.

 • Before using the product for special purposes such as nuclear power, electric power, aerospace, medical, or passenger 

movement vehicles, please contact Mitsubishi Electric sales office.

 • This product has been manufactured under strict quality control. However, when installing the product where major 

accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.

Note

 • If in doubt at any stage during the installation of the product, always consult a professional electrical engineer who is 

qualified and trained in the local and national standards. If in doubt about the operation or use, please contact your local 
Mitsubishi Electric representative.

 • Since the examples indicated by this manual, technical bulletin, catalog, etc. are used as a reference, please use the 

product after confirming the function and safety of the equipment and system.

 • This manual content, specification etc. may be changed, without a notice, for improvement.
 • The information in this manual has been carefully checked and is believed to be accurate; however, if you notice a doubtful 

point, an error, etc., please contact your local Mitsubishi Electric representative. When doing so, please provide the manual 
number given at the end of this manual.

Содержание MITSUBISHI ELECTRIC MELSEC iQ-F FX5

















































































































































































Отзывы:

Нет отзывов