SICK MITSUBISHI ELECTRIC MELSEC iQ-F FX5, Руководство пользователя

Страница: 125 / 176

10 TROUBLESHOOTING
10.4 List of Error Codes
123
10
10.4
List of Error Codes
When an error occurs in a running safety extension module, the error code is stored to 'Latest error code' (Un\G0) in the buffer
memory, and 'Error flag' (Un\G69.15) turns ON.
The following shows the error code list that will be stored in 'Latest error code' (Un\G0).
Error code Error name Description Corrective action
0000H

There is no error.

3001H Hardware error A hardware error occurred. Turn the power OFF and ON.
If the error occurs again, there is a possibility that the module is
malfunctioning.
Please contact your local Mitsubishi Electric sales office or
representative.
3030H Flash memory error Data in the flash memory is abnormal. Turn the power OFF and ON.
If the error occurs again, there is a possibility that the module is
malfunctioning.
Please contact your local Mitsubishi Electric sales office or
representative.
3051H Safety extension
module initializing
communication error Unable to read data from a safety extension
module when it is initialized. Turn OFF the power of the CPU module and the safety extension
module and turn ON the power again simultaneously.
If an error occurs after powering ON at the same time, check if the
POWER LED on the safety extension module turns ON.
If the POWER LED of the safety extension module does not turn ON,
there is a possibility that the module is malfunctioning.
Please contact your local Mitsubishi Electric sales office or
representative.
3052H Safety extension
module
communication error Unable to read data in the safety extension
module. Turn OFF the power of the CPU module and the safety extension
module and turn ON the power again simultaneously.
If an error occurs during operation, check if the POWER LED on the
safety extension module turns ON. If the LED does not turn ON, reset
the power of the whole system.
If the error is not resolved, there is a possibility that the module is
malfunctioning.
Please contact your local Mitsubishi Electric sales office or
representative.
3053H Number of
connectable safety
extension modules
excess error The number of connected safety extension
modules exceeds the maximum number of
connectable modules. Connect the safety extension modules within the connectable limit.
If this error occurs even when the number of connected modules are
below the limit, check the parameter and the actual connected
module. If they are different, adjust the parameter and the module
configuration.
3054H CRC error An error occurred in CRC check. Remove dirt and dust on the connector, and check if there is poor
contact of the cable.
Check the setting and wiring, and reset the power of the whole
system.
If the error is not resolved, there is a possibility that the module is
malfunctioning.
Please contact your local Mitsubishi Electric sales office or
representative.
3100H Safety extension
module
communication data
error Failed to read data in the safety extension
module. Remove dirt and dust on the connector, and check if there is poor
contact of the cable.
Check the setting and wiring, and reset the power of the whole
system.
If the error is not resolved, there is a possibility that the module is
malfunctioning.
Please contact your local Mitsubishi Electric sales office or
representative.
3106H Bus error A bus error occurred. Remove dirt and dust on the connector, and check if there is poor
contact of the cable.
Check the setting and wiring, and reset the power of the whole
system.
If the error is not resolved, there is a possibility that the module is
malfunctioning.
Please contact your local Mitsubishi Electric sales office or
representative.