SICK MERCEM300Z, Руководство по эксплуатации

Страница: 34 / 82

34 MERCEM300Z · Operating Instructions · 8013255 V2.0 · © SICK AG
Operation
Su
bj
ec
t t
o c
han
ge
w
ith
ou
t n
ot
ic
e
4.4
Status and classification
4.4.1
Status (operating state)
The respective operating state (e.g.: Measuring, heating, etc.) is shown in the top line of the
operator panel.
4.4.2
Classification, LEDs
The classification (error status) is indicated by LEDs on the operator panel and recorded in
the logbook.
Classification LED Significance Measuring
screen
Analog
outputs
1
1 Typical default (

System Documentation).
Status
signal
2,3
2 Option (

System Documentation).
3 See SOPAS ET in the “Digital outputs” menu.
Maintenance
Wartung
The device is switched to “ Maintenance ” via the
menu or program.
The status bar shows: “ Maintenance “
Current Held 4
4 The last valid measured value is held.
According to
setting
Uncertain
Unsicher
The uncertain measured value (e.g. outside
calibration range) blinks .
To view the cause: Press the <Diag> button.
Current Current According to
setting
Maintenance
request
Wartungsbedarf
Yellow Irregularities (e.g. deviation from check cycle too
high) that require a review of the cause.
To view the cause: Press the <Diag> button.
Current Current According to
setting
Failure
Ausfall
Red Device failure (e.g. lamp failed)
To view the cause: Press the < Diag> button.
The device is in "Stand-by" state (

p. 68, §8.4)
Held
4
Held
4
According to
setting