48
8013741/16LH/V1-7/2020-04| SICK
O P E R A T I N G I N S T R U C T I O N S | MCS300P Ex
Subject to change without notice
5
MENUS
5.4.3.3
Start times
Menu 2.3.3: Adjustment/Parameter/Start time 1 - 8
Menu 2.3.4: Adjustment/Parameter/Start time 9 - 16
5.5
Diagnosis
Menu 3: Diagnosis
2.3.3
2.3.3.1
In this menu item:
– The respective next start time of a “cyclic trigger” is shown and
– the “cyclic triggers” are disabled or enabled.
Explanation: A “cyclic trigger” can be assigned to sequence
control programs (
→
SOPAS ET).
“Cyclic trigger” means: The respective program is started in a
fixed cycle (hours, days or weeks).
Status: Measuring
Back
Enter
Start time 1-8
/Adj/Par/Start
1 Adjustment Comp.1
2 Fri Sep.23 22:00:00
3 Adjustment Comp.2
4 Sat Sep.24 23:00:00
Status: Measuring
Back
Save
ZERO
/Adj/Par/Start/1
disable
enable
●
Cyclic trigger name
●
Next start time (dd.mm.yy hh:mm:ss) or “-disabled-”.
▸
Disable the cyclic trigger
▸
Enable the cyclic trigger
3
see “Diagnosis/check values”, page 49
see “Diagnosis/temperatures”, page 50
see “Diagnosis/system info”, page 50
see “Diagnosis/error messages and Diag button”, page 50
Status: Measuring
Back
Enter
Diagnosis
/Diag
1 Check values
2 Temperatures
3 System info
4 Error messages
