manualshive.com logo in svg

SICK InspectorP621, Руководство по эксплуатации

Поделиться
Скачать
SICK InspectorP621 Скачать руководство пользователя страница 14

Position

Description

10

Integrated illumination unit 

1)

 /

aiming laser
S: red left, blue right / aiming
laser
D: left IR 

2)

 , right IR 

2)

 / aiming

laser

11

Parameter set
F: Full Feature Set for variant
InspectorP621

12

Focal length
B: 9.6 mm
F: 17, 1 mm
G: 17, 1 mm with visible block
filter

13

Connectivity package
B: Ethernet, serial, CAN, I/O,
USB, memory card slot

14

IP Protection class
5: IP 65

1)

Front view

2)

IR = Infrared light

NOTE

Not all combinations are possible according to the type code. The available device vari‐
ants can be found online at:

•

www.sick.com/InspectorP62x

3.2

Scope of delivery

The delivery of the device includes the following components:

Table 2: Scope of delivery

No. of
units

Component

Comment

1

Device in the version ordered

Without bracket and optional connecting cables.

1

Printed safety notes, multilin‐
gual

Brief information and general safety notes.

2

Sliding nut, 5.5 mm deep, with
M5 threaded fixing hole

Alternative mounting option for the device instead
of tapped blind hole. Use in pairs!

Associated components not contained in the delivery:

Table 3: Other components

Component

Comment

SOPAS ET configuration software

Available online at:

•

www.sick.com/SOPAS_ET

SICK AppStudio software

Available online at:

•

www.sick.com/SICK_AppStudio

SICK AppManager software

Available online at:

•

www.sick.com/SICK_AppManager

3 

PRODUCT DESCRIPTION

14

O P E R A T I N G   I N S T R U C T I O N S | InspectorP621

8024439//2019-06 | SICK

Subject to change without notice

Содержание InspectorP621











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды