SICK Inspector PIM60 Скачать руководство пользователя страница 39

Страница: 39 / 84

Result output formatting

A.1

XML based formatting

The formatting of the result string is defined by a formatting string written in XML. It is possible

to mix XML tags and free text in the formatting string. The text parts will appear as is in the

result string, whereas the XML tags will be replaced by the appropriate values. All white

spaces in the formatting strings are ignored. In order to include whitespace in the result string

use the tags <SPACE/>, <TAB/> and <NEWLINE/>.
The tags are either container tags or value tags. The container tags do not generate any text

on their own. It is the value tags inside the container tags that generate the text. The following

container tags are valid in the Inspector PIM60:

Explanation

Container tag

Used to present values concerning the

Object locator

OBJECT_LOC

Used to present values for a found blob in a blob ROI. The index

points out the found blob in accordance with the blob sorting

order. If no index is given this is the same as index = 0.

BLOB

Used to present values concerning inspections.

PIXEL_COUNTER, PATTERN,

EDGE_PIXEL_COUNTER

Used to present values concerning a defined

Polygon

POLYGON

Container tag within the <POLYGON> tag for presenting values

concerning the polygon corners. See example:

CORNERS

</CORNERS>

</POLYGON>

The XML based formatting string is entered in the

Formatting string for Ethernet Output

part of

the

Ethernet Result Output

dialog. To get a default string for the current chosen reference object

click

Create default formatting string

. Click

Validate output string

to validate the formatting string.

The output that will be sent over Ethernet or errors are reported in the

Current output string

part

of the

Ethernet Result Output

dialog.

Note

When using binary transfer, the

Validate output string

button will only show how many bytes

that will be sent for the current analyzed image and whether the formatting was correct or

not.
The maximum size of the XML buffer is 7900 ASCII characters. This means it will not be

possible to e.g. paste an XML string into to the input field if it's too large. For a larger config-

uration it might not be possible to configure as much output information as wanted due to

this limitation.

A.2

XML formatting

The content of the Ethernet output is configured using an XML-based formatting string. The

available tags can be categorized into two groups:
• container tags: <OBJECT_LOC>, <POLYGON>, <BLOB>, ...
• value tags: <X/>, <PIXELS/>, <NEWLINE/>, <TIME/>,...

Subject to change without notice

8015726/ZPP7/2018-

Appendix

Result output formatting

Reference Manual
Inspector PIM

Содержание Inspector PIM60





















































































Результаты поиска

Содержание Inspector PIM60

Отзывы:

Похожие инструкции для Inspector PIM60

Бренды по названию

Популярные бренды

SICK Inspector PIM60, Справочное руководство

Результаты поиска

Содержание Inspector PIM60

Отзывы:

Похожие инструкции для Inspector PIM60

Бренды по названию

Популярные бренды