manualshive.com logo in svg

SICK i200 Lock, Руководство по эксплуатации

Поделиться
Скачать
SICK i200 Lock Скачать руководство пользователя страница 9

DANGER

Hazard due to lack of effectiveness of the protective device
In the event of a voltage drop, the safety locking device unlocks regardless of whether
the dangerous state of the machine has ended.

b

Assess the risk of accident. Use for protecting people requires correct project plan‐
ning.

3.2.2

Locking device monitoring

All variants feature at least 1 positive opening normally closed contact for locking
device monitoring. The output state changes when locking or unlocking the locking
device.

Variants with 2 positive opening normally closed contacts for locking device monitoring
are recommended to protect people.

3.2.3

Door monitoring

All versions feature 3 contacts for door monitoring. 2 contacts are positive opening nor‐
mally closed contacts. 1 contact is a normally open contact. The output state changes
when opening or closing the protective device.

3.2.4

Status indicators

The safety locking device outputs the status of the locking device using the light emit‐
ting diode.

Table 1: Status LEDs

Light emitting diode
status

Meaning

O

Voltage is present on the magnet for the locking device.
With standby current locking principle: locking device unlocked.
With operating current locking principle: locking device locked with
inserted actuator.

o

No voltage is present on the magnet for the locking device.
With standby current locking principle: locking device locked with
inserted actuator.
With operating current locking principle: locking device unlocked.

3.3

Symbols on the product

Table 2: Symbols on the product

Symbol

Meaning

Positive opening normally closed contact for locking device moni‐
toring

Positive opening normally closed contact for door monitoring

3.4

Manual unlocking

In some situations, it necessary to unlock the locking device manually (e.g. is faults are
present). After unlocking, a function test must be performed.

Mechanical unlocking mechanism

With the mechanical unlocking mechanism, the safety locking device can be unlocked
regardless of the status.

PRODUCT DESCRIPTION 

3

8020558//2017-02-14 | SICK

O P E R A T I N G   I N S T R U C T I O N S | i200 Lock

9

Subject to change without notice

Содержание i200 Lock





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды