SICK GM901-02, Руководство по эксплуатации

Страница: 62 / 100

1 Follow the menu path as described, see "Parameter settings for the external
temperature sensor PT1000", page 59 .
2 Enter the password, see "Entering the password", page 52 .
3 Enter the changes.
4 Confirm value with "Enter".
5 Press the "Left arrow" to return to menu item "Parameter Settings".
back
Substitute : 150°C
External :
Scale Low : 0 °C
Scale High : 250 °C
Edit: Enter
Temperature Input
AnaIn
Parameters
back
Substitute : 150°C
External :
Scale Low :
Scale High : 250 °C
Temperature Input
AnaIn
back
Substitute :
150°C
External :
Scale Low :
Scale High : 350 °C
Select
Temperature Input
AnaIn
0 °C
0 °C
back
Substitute : 150°C
External :
Scale Low : 0 °C
Scale High : 350 °C
Edit: Enter
Temperature Input
AnaIn
Select
Figure 41: Setting the upper limit value for the temperature range (example)
9.4.7.5 Setting the signal: Live Zero
Submenu item "Input Low" serves to set the signal strength for the lower measuring
range value (Live Zero).
NOTE
Factory setting: 4.0 mA
1 Follow the menu path as described, see "Parameter settings for the external
temperature sensor PT1000", page 59 .
2 Enter the password, see "Entering the password", page 52 .
3 Enter the changes.
4 Confirm value with "Enter".
5 Press the "Left arrow" to return to menu item "Parameter Settings".
back
External :
Scale Low : 0 °C
Scale High : 250 °C
Edit: Enter
Temperature Input
AnaIn
back
Temperature Input
back
Temperature Input
back
Temperature Input
back Edit: Enter
Temperature Input
Select Select
Select
Input low :
4,0 mA
External :
Scale Low : 0 °C
Scale High : 250 °C
AnaIn
Input low :
04,0 mA
External :
Scale Low : 0 °C
Scale High : 250 °C
AnaIn
Input low :
04,0 mA
External :
Scale Low : 0 °C
Scale High : 250 °C
AnaIn
Input low :
05,0 mA
External :
Scale Low : 0 °C
Scale High : 250 °C
AnaIn
Input low :
5,0 mA
Figure 42: Setting the lower measuring range value (Live Zero) (example)
9.4.7.6 Setting the signal: Upper output value
Submenu item "Input High" serves to set the signal strength for the upper measuring
range value.
NOTE
Factory setting: 20.0 mA
1 Follow the menu path as described, see "Parameter settings for the external
temperature sensor PT1000", page 59 .
2 Enter the password, see "Entering the password", page 52 .
3 Enter the changes.
9
MENUS
62 O P E R A T I N G I N S T R U C T I O N S | GM901-02 8008932/16YT/V4-0/2022-02 | SICK
Subject to change without notice