manualshive.com logo in svg

SICK GM700 Ex, Руководство по эксплуатации, Страница: 60 / 102

Поделиться
Скачать
SICK GM700 Ex Скачать руководство пользователя страница 60

Display

Function

Diag

To display warning and/or error messages (plain text) and retrieve sensor values:
Press this button.

Enter

Call up/start/confirm selected menu function.

Select

Select function/character.

Start

Start procedure.

In a selection list: Move cursor upwards.

During input: Next character.

Move cursor downwards.

Move cursor to the left.

Move cursor to the right.

8.3

Menu tree of the evaluation unit

NOTE

Menu texts are shown in 

English

.

8.3.1

Menu tree Measuring

meas

Menu level

Explanation

Measuring

•

Current measured values: Depending on
device version

•

Reference variables (wet, dry)

8.3.2

Menu tree Diagnosis

Menu level
Diagnosis

Diagnosis

Malfunction

Current error messages (plain text)

Warning

Current warning messages (plain text)

Sensor values

Displays diagnostic values and control values

GM700 Sensor values

GM700

Current monitored sensor values (amplification
setting, internal temperature control, control val‐
ues, etc.)

8 

OPERATION

60

O P E R A T I N G   I N S T R U C T I O N S | GM700 Ex

8019532/100Q/V1-1/2018-08 | SICK

Subject to change without notice

Содержание GM700 Ex







































































































Отзывы:

Нет отзывов