SICK FLOWSIC100 Flare-XT, Руководство по эксплуатации

Страница: 14 / 188

14 FLOWSIC100 Flare-XT · Operating Instructions · 8023761/V1-0/2020-10 · © SICK Engineering GmbH
For your safety
2.1
Basic safety information
Observe the safety information here and the warning information in the following Sections
of these Operating Instructions to reduce health risks and avoid dangerous situations.
In the case of warning symbols on the devices, the Operating Instructions must be
consulted to determine the nature of the potential hazard and the actions required to avoid
the hazard.
▸
Only put the FLOWSIC100 Flare-XT into operation after reading the Operating
Instructions.
▸
Observe all safety information.
▸
If there is something you do not understand: Contact SICK Customer Service.
▸
Only use the FLOWSIC100 Flare-XT measuring system as described in these Operating
Instructions. The manufacturer bears no responsibility for any other use.
▸
Do not attempt any work on or repairs to the FLOWSIC100 Flare-XT unless described in
this Manual.
▸
Do not modify the FLOWSIC100 Flare-XT in any way unless specifically instructed and
permitted to do so by the manufacturer.
▸
Only use accessories approved by the manufacturer.
▸
Do not use damaged components or parts.
▸
If you do not follow these guidelines, the following applies:
– Any warranty by the manufacturer becomes void,
– The FLOWSIC100 Flare-XT can become dangerous
– The approval for use in potentially explosive atmospheres is no longer valid.
Special local requirements
Follow all local laws, regulations and company policies applicable at the respective
installation location.
2.2
Intended use
Use the system components of the FLOWSIC100 Flare-XT measuring system only as
described in this document.
Do not exceed the maximum permissible pressure and temperature values shown on the
type plates of the FLSE100-XT sender/receiver units in operation.
The manufacturer bears no responsibility for any other use.
● FLSE100-XT sender/receiver units:

p. 28, §5.1
● Interface unit:

p. 86, §6.1