SICK EuroFID, Руководство по эксплуатации

Страница: 92 / 214

92 EuroFID · Operating Instructions · 8011094 V2.3 · © SICK AG
Main Menu Functions
10.4
Flame ignition
Function
This menu function is used to manually ignite the FID flame. This is only necessary in the
event of maintenance work or for troubleshooting.
When ignition is started, the fuel gas supply is briefly increased and the FID flame is ignited
with a spark plug. If this does not work immediately, the EuroFID automatically makes
several ignition attempts. If 10 consecutive ignition attempts were unsuccessful, a
malfunction message is displayed.
When you start the function while the FID flame is burning, nothing happens.
Procedure
1 Open the menu: Main menu

Flame Ignition
To start the function:
2 Press .
➝
The main menu appears – with the added information I g n i t i o n .
F l a m e I g n i t i o n
F l a m e I g n i t i o n
Y E S
C h a n g e o r
6 1 . 6 m g C
R a n g e . . . 1 0 0

Menu title

Selection box

Current measured value

Current measuring range (measuring range end value)

Status message

Status message
To terminate the function:
2 Press or .
➝
The selection box is highlighted.
3 Press .
➝
The selection box switches to N O .
4 Press or .
➝
E n d is highlighted.
5 Press .
E n d