SICK EtherNet/IP AFM60 Скачать руководство пользователя страница 100 | Manualshive

Страница: 100 / 113

SICK EtherNet/IP AFM60 Скачать руководство пользователя страница 100

Figure 112: Round axis functionality

•

Zähler für die Anzahl der Umdrehungen

(attribute ID 7Eh)

•

Nenner für die Anzahl der Umdrehungen

(attribute ID 7Fh)

•

Gesamtauflösung

(CMR) (attribute ID 11h)

The requirements and restrictions for the parameters are described in

NOTE

If round axis functionality is activated, then the scaling is set to

on

on the Scaling page.

However, no scaling parameters are offered.

DANGER

Before using the Round axis functionality function, check whether there is any danger
from the machine or system in which the encoder is integrated!
The Round axis functionality function can lead to an immediate change of the position
value output by the encoder.
This could cause an unexpected movement that could endanger people or damage the
system or other objects.

NOTE

The Round axis functionality function should only be used when the encoder is at a
standstill.

6.2.7

Limits

On this page, the position, speed, acceleration and temperature limits can be parame‐
terized:

•

Lower limit of the position (attribute ID 16h)

•

Upper limit of the position (attribute ID 17h)

NOTE

Area monitoring can be implemented by specifying an upper and lower limit of the
position. It is not an electronic cam.

•

Lower speed limit (attribute ID 1Bh)

•

Upper speed limit (attribute ID 1Ch)

•

Lower limit of acceleration (attribute ID 20h)

•

Upper limit of acceleration (attribute ID 21h)

If these limits are exceeded, then the consequence is:

•

The warning flag (attribute ID 31h) of the position sensor object is set (

table 24, page 29

•

On the

Gerät

page, the status LED flashes (

see "Device", page 95

).

•

On the

Status

page, the warning text is displayed (

see "Status", page 101

In addition, other limits that are not included in the position sensor object can be set:

6

CONFIGURATION USING THE INTEGRATED WEB SERVER

100

O P E R A T I N G I N S T R U C T I O N S | AFS/AFM60 EtherNet/IP

8014213/1EF3/2021-12-08 | SICK

Subject to change without notice

«
...
98
99
100
101
102
...
»

Содержание EtherNet/IP AFM60


















































































































Отзывы:

Нет отзывов