92
8020216/19YN/V3-0/2020-12| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100 Ex-3K
Subject to change without notice
11
MENUS
1.4.3
Variant
Assigning the sensor type (usually assigned ex works)
This assignment is only necessary when the system has
been changed. All compatible sensor types are displayed
for selection.
2
Sensor
Settings on measuring device
2.1
Operating mode
Set the maintenance mode or operating mode of the sen-
sor
2.2
Parameter
Set regression coefficients (
see “Calibration for dust con-
centration measurement”, page 82
(Requires maintenance mode condition)
2.2.1
Coeff
Set Coefficient set 0-3 (
see “Defining regression coeffi-
)
2.2.2
cc2
Set regression coefficients (password required)
2.2.3
cc1
Set regression coefficients (password required)
2.2.4
cc0
Set regression coefficients (password required)
2.3
Diagnosis
Display diagnosis values
2.4
Device info
Display sensor information
11.1.2
Menu tree “Diagnosis”
Menu level Designation
Explanation
1
I/O (MCU)
Display MCU(DH Ex) error and warning messages
1.1
Error
Display MCU(DH Ex) error messages
1.2
Warnings
Display MCU(DH Ex) warning messages
2
Sensor
Display sensor error and warning messages
2.1 Error
Display
sensor error messages
2.2
Warnings
Display sensor warning messages
