![SICK deTem4 Core Ex Скачать руководство пользователя страница 32](http://html1.mh-extra.com/html/sick/detem4-core-ex/detem4-core-ex_operating-instructions-manual_1264385032.webp)
!
§
$
"
a
b
a
b
Figure 16: Mounting the QuickFix bracket to a profile
1
Mounting on the side
2
Mounting on the side
3
Mounting on the side
4
Mounting on the back
5.3.2
Mounting the FlexFix bracket
Overview
In the FlexFix bracket, the sender and receiver can be rotated ± 15° around their longi‐
tudinal axis.
2 FlexFix brackets are used to mount the sender and receiver.
As a rule, each FlexFix bracket is mounted to the flange plate with 2 screws. In excep‐
tional cases (e.g. reduced vibration and shock requirements), a FlexFix bracket can be
mounted with only one screw if this does not impair the function.
Important information
NOTICE
The housing of the multiple light beam safety device can become scratched if the screw
heads protrude when the FlexFix brackets are mounted on the back.
Avoid this by taking one of the following measures:
b
Use flat head screws.
b
If using cylinder head screws, use two screws per bracket and no washers.
NOTE
The FlexFix mounting kit (part number 2073543) contains 2 FlexFix brackets, one align‐
ment tool, and the required screws, sliding nuts, and washers.
5
MOUNTING
32
O P E R A T I N G I N S T R U C T I O N S | deTem4 Core
8020453/14Q7/2020-04-27 | SICK
Subject to change without notice