!
"
§
Figure 31: Inserting the protective device in the FlexFix brackets
2.
Use an M5 screw to secure the position of the active and passive unit in the Flex‐
Fix bracket.
Further topics
•
"Alignment of the active and passive units", page 75
5.4.2.2
Mounting the FlexFix bracket on the back of a device column
Overview
The FlexFix bracket can be mounted in the device column using sliding nuts.
If you wish to mount the active and passive units each in the center of the device col‐
umn, use alignment plates between the FlexFix brackets and the device column.
Only active and passive units without muting arms can be mounted in a device column.
Approach
1.
After mounting the FlexFix brackets, screw the active and passive units into the
FlexFix brackets from the front and align them with one another.
2.
Use an M5 screw to secure the position of the active and passive units in the Flex‐
Fix bracket.
5
MOUNTING
58
O P E R A T I N G I N S T R U C T I O N S | deTem4 A/P
8024782/2019-11-19 | SICK
Subject to change without notice