SICK CLV62x Скачать руководство пользователя | Manualshive

Страница: 28 / 40

background image

Chapter

2

Online Help

Barcode Scanner CLV62x

28

©

SICK AG · Division Auto Ident · Germany · All rights reserved

8011967/S345/2008-04-23

CLV62x

General match-code

teach-in settings

Use the parameters of the

General match-code teach-in settings

group to define conditions

and effects for teach-in.

2.2.4.4 Filter/Sorter for output formatting

Filter/Sorter for output

format #1

Code contents for output format #1 are filtered and/or sorted via the parameters of the

Filter/Sorter for output format #1

group.

The filter and sorter can be arranged in any order and number by drag & drop. To arrange
them parallel to each other, they must be moved between the margin and the available fil-
ter/sorter. To copy a filter/sorter by drag & drop, press the Ctrl button. To delete a filter/sort-
er, drag it into the recycle bin (mouse pointer must be above recycle bin).

Parameter

Function

Use teach-in trigger as object
trigger

Trigger source for teach-in of evaluation condition also serves as
an object trigger.

Object trigger required

In addition to the trigger source for the teach-in of the evaluation
condition the start of the object trigger is necessary as well
(

chapter 2.2.1.1 Object trigger control, page 9

Don't change code config.

The settings of the

Code configuration

group will not be changed.

Limit code config. to last
teached in code

With activated function, only the teached in codes are set to
active (see

chapter 2.2.3 Code configuration, page 12

).

Expand code config. by last
teached in code

The settings of the

Code configuration

group will be automatically

adapted during teach-in.

Save permanent

Activate/deactivate whether the teached in evaluation conditions
will be saved permanently in the PROM of the bar code scanner
(as well as on the Micro SD memory card and / or the permanent
storage module CMC600, if connected).

Use all code types for teaching
(except for pharmacode)

Codes of all types except for

P

HARMACODE

can be teached in.

The settings of the

Code configuration

group will not be consid-

ered for teach-in.

Use the set code types from
code configuration for teaching

Only codes of the active code types can be teached in (see

chapter 2.2.3 Code configuration, page 12

Use only pharmacode type for
teaching

Only pharmacodes can be teached in.

Parameter

Function

Filter

Filter code contents according to various criteria.

Define filter criteria.

Sorter

Sort code contents according to various criteria.

Define sorter criteria.

«
...
26
27
28
29
30
...
»

Содержание CLV62x









































Отзывы:

Нет отзывов

Похожие инструкции для CLV62x

Бренд: Wasp Страницы: 28

Wearable Ring Scanner

Бренд: M3 Mobile Страницы: 35

Tire and Rubber

Бренд: Metrologic Страницы: 1

Бренд: Slick Страницы: 41

Бренд: Globalcom Страницы: 24

Бренд: Cognex Страницы: 17

PowerScan PD953X

Бренд: Datalogic Страницы: 40

ePort G9 Card Reader

Бренд: USA Technologies Страницы: 9

Бренд: Hamlet Страницы: 55

Бренд: Hamlet Страницы: 102

iRANGE IR-UNIREAD

Бренд: Laser Страницы: 7

Бренд: Schlumberger Страницы: 22

Бренд: Quatech Страницы: 2

Smart Card Reader

Бренд: Wincor Nixdorf Страницы: 23

Бренд: Allflex Страницы: 20

Бренд: Unitech Страницы: 36

Бренд: Pocketbook Страницы: 74

cyberJack RFID universal

Бренд: Reiner Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды