■
Devices without heating: To avoid additional external heating of the device during
operation or optical device dazzle, protect the device from direct or indirect sun‐
light.
■
Devices with heating: To prevent optical device dazzle, protect the device against
direct and indirect sunlight.
Enclosure rating
■
For further information,
see "Conditions for specified enclosure rating", page 8
Mounting
■
The device must only be mounted using the pairs of blind tapped holes provided
for this purpose.
■
Mount the device in a shock and vibration insulated manner.
Equipment required
■
Mounting device (bracket) with sufficient load-bearing capacity and suitable
dimensions for the device.
■
2 M5 screws – the maximum screw-in depth in the device is 5 mm from the
housing surface.
■
Tool and tape measure
The screws are for mounting the device on mounting equipment (bracket) supplied by
the user. The screw length required depends on the mounting base (wall thickness of
the bracket).
NOTE
The scope of delivery of a SICK bracket already includes the right screws for mounting
the device to the bracket.
5.2.2
Instructions for mounting the device when the ambient temperature can fall below 0 °C
Notes on electrical installation
see "Instructions for electrical installation when the
ambient temperature can fall below 0 °C", page 42
The devices with integrated heating (CLV61x-Dxxxxx
F0
) can be operated at low ambient
temperatures down to –35 °C.
Prerequisites:
•
Only perform mounting and connection work at ambient temperatures
between –25 °C and 40 °C.
•
The device may only be in a non-operating state at ambient temperatures below
0 °C
•
When mounting, make sure that a thermal transition between the device and the
environment is largely reduced. Use appropriate holders (optional accessories).
NOTE
Operating the device at the lower limit of the permissible ambient temperature range
The ensure that the device can produce the required heating power, do not expose it to
strong air flows (e.g. from a ventilation system).
b
If necessary, shield the device from air movement with suitable means.
5
MOUNTING
30
O P E R A T I N G I N S T R U C T I O N S | CLV61x DualPort (PROFINET)
8017842/19XD/2021-11-19 | SICK
Subject to change without notice
