O P E R AT I N G I N S T R U C T I O N S |
Bulkscan LMS511
8014829/ZNC5/2017-06-06|
S I C K
Subject to change without notice
9
ON SAFETY
•
The national and international legal specifications apply to the installation and use
of the sensor, to its commissioning and to technical inspections repeated at regular
intervals, in particular:
◦
The accident prevention regulations and work safety regulations.
◦
And any other relevant safety regulations.
• The manufacturer and operator of the system in which the Bulkscan is installed are
responsible for coordinating and complying with all applicable safety specifications
and regulations, in cooperation with the relevant authorities.
•
The checks must be carried out by qualified safety personnel or specially qualified
and authorized personnel and must be recorded and documented to ensure that the
tests can be reconstructed and retraced at any time.
• These operating instructions must be made available to the operator of the system
in which the Bulkscan is used. The system operator must be instructed by qualified
safety personnel and read the operating instructions.
• The Bulkscan does not constitute a safety component according to the EC Machinery
Directive (2006/42/EC).
• The Bulkscan is not a device for the protection of people in the context of the related
safety standards for machinery.
• The Bulkscan must not be used in explosion hazard areas.
• Any other use that is not described as correct use is prohibited.
•
The use of accessories not specifically approved by SICK is at own risk.
2.3.1
Electrical installation work
• Only authorized personnel are allowed to perform the electrical installation work.
• Electrical connections between the Bulkscan and other devices may only be made
when there is no power to the system.
• Select and implement wire cross-sections and their correct fuse protection in accor-
dance with the applicable standards.
Do not open the housing.
Observe the current safety regulations when working on electrical systems.
2.3.2
Laser radiation
WARNUNG
WARNING
AVERTISSEMENT
Laserstrahlung!
Laser radiation!
Rayonnement laser !
LASER PRODUKT KLASSE 1
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE
CLASSE 1
Wellenlänge: 905 nm
(unsichtbares Infrarotlicht)
EN/IEC 60825-1:2014
Identische Laserklasse für
Ausgabe EN/IEC 60825-
1:2007
Bulkscan® LMS511-20190:
Impulsleistung: 29,6 W
Impulsdauer: 2,9 ns
Wavelength: 905 nm
(invisible infrared light)
EN/IEC 60825-1:2014
Identical laser class for issue
EN/IEC 60825-1:2007
Bulkscan® LMS511-20190:
Puls output 29.6 W
Puls output: 2.9 ns
Longueur d‘onde: 905 nm
(lumière infrarouge invisibles)
EN/IEC 60825-1:2014
Même classe laser pour
l’édition EN/CEI 60825-
1:2007
Bulkscan® LMS511-20190:
Puissance d‘impulse: 29,6 W
Durée d‘impulse: 2,9 ns
