SICK Backup Assistance System, Руководство по эксплуатации

Страница: 34 / 72

4 MOUNTING
34
8022161-1B29 / V2-0/2021-04|SICK T R A N S L A T I O N O F A N O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | Backup Assistance System
Subject to change without notice
4.4 Mounting signal light bar
4.4.1 Notes on mounting
Fig. 30: Mounting the signal light bar(s) in the driver field of vision
▸
In general, install signal light bar(s) with buzzer within the driver field of vision in the
driver's cab.
▸
Ensure that the connection on the signal light bar can be easily reached after
mounting. Otherwise, connect the signal light bar before mounting (see
5.3 Connecting
signal light bar ).
•
Screw on.
•
Fasten with adhesive tape.
•
Fasten with metal strip.
4.4.2 Screwing on signal light bar
The signal light bar has four M5 holes on the back.
Fig. 31: Tightening the signal light bar
▸
Mount the lamp with suitable screws.
▸
Select the tightening torque according to the screws used. The housing of the rail is
made of aluminum alloy.
General
Fastening methods