3
SYSTEM DESCRIPTION
16
8022161-1B29 / V2-0/2021-04|SICK
T R A N S L A T I O N O F A N O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | Backup Assistance System
Subject to change without notice
3.2.3
Control unit
Fig. 5:
Control unit with power supply unit and printed circuit board assembly
Legend
1
Housing with mounting plate
2
Cables leading out of the housing for connecting the control unit to the
industrial truck
3
M12 round connector for connecting the system components
•
Control unit with printed circuit board assembly and integrated power supply unit.
•
Installed near the seat of the vehicle.
•
Connection to the voltage supply and the reverse signal of the industrial truck.
•
Connection of the individual system components.
•
Main control unit of the driver assistance system.
•
Provides the voltage supply for all connected system components.
NOTE!
Different power supply units are available for vehicles with different electrical
systems.
•
Processes the incoming signals of the connected 2D LiDAR sensors and outputs the
processing result to the associated signal light bar via I/O signal.
•
Also evaluates the vehicle signal for reverse when reverse gear is activated.
NOTE!
Result processing is only forwarded when the reverse gear of the industrial truck
is activated.
Features
Function
