SYSTEM DESCRIPTION
3
11
8022161-1B29 / V2-0/2021-04|SICK
Subject to change without notice
T R A N S L A T I O N O F A N O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | Backup Assistance System
3
System description
The BAS
(
B
ackup
A
ssistance
S
ystem) is a driver assistance system that monitors the
blind spot behind a manned forklift truck or other industrial truck when reversing with
reverse gear activated using one or two 2D LiDAR sensors, thus minimizing collisions.
Only objects which are visible in the measurement plane for the 2D LiDAR sensor are
detected. Therefore, the 2D LiDAR sensor must have a free view of the area to be
monitored.
3.1
Scope of delivery
The BAS driver assistance system distinguishes between two system variants with one
or two TiM351 2D LiDAR sensors for each vehicle type (vehicles with electric motors or
combustion engines).
The driver assistance system is designed for indoor and outdoor use.
Fig. 1:
BAS scope of delivery for vehicles with electric motor and combustion engine
Quantity Part no.
Description
1117895
BAS3501-E11111
1
1067299
TiM351 2D LiDAR sensor
1
1115792
Control unit for connection to vehicles with electric motor
1
1114219
Operable signal light bar with buzzer
1
6045234
2D LiDAR sensor M12 connection cable, 12-pin, 5 m
1
2096106
Signal light bar M12 connection cable, 8-pin, 5 m
1
2086761
TiM351 2D LiDAR sensor mounting kit
1
2122092
Mounting kit with screws and 2 RAM brackets
OR
1117896
BAS3502-E11221
2
1067299
TiM351 2D LiDAR sensor
1
1115792
Control unit for connection to vehicles with electric motor
2
1114219
Operable signal light bar with buzzer
2
6045234
2D LiDAR sensor M12 connection cable, 12-pin, 5 m
2
2096106
Signal light bar M12 connection cable, 8-pin, 5 m
2
2086761
TiM351 2D LiDAR sensor mounting kit
2
2122092
Mounting kit with screws and 2 RAM brackets
BAS for vehicles with
electric motor
