6
COMMISSIONING
50
8023732/2018-09-10|SICK
O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | AOS301-WWD
Subject to change without notice
6.4.4
Configuring monitored area (AOS RMS system function)
The
AOS RMS
system function processes the measurement points passed on by the
RMS320
system function. All object positions which are outside the defined monitoring
area are thereby discarded. The object positions within the monitored area are tracked.
Vehicle tracking begins as soon as the first measurement point can be assigned to the
monitored area and ends with the first measurement point outside of the monitored area.
All object positions inside the monitored area are output as trajectories by the
AOS RMS
system function. Every object point of the trajectory has a time stamp, the exact position
of the coordinate system and the speed.
The geometry of the monitored area is defined by the parameters of the
AOS RMS
system
function. The monitored area must be completely in the field of view of the sensor.
The dimensions of the monitored area are defined as point sequences. The coordinates of
the individual points are entered separated by a semicolon.
Fig. 34: Entering dimensions of the monitored area
AOS RMS
system function
System function
parameters
Entering dimensions
