manualshive.com logo in svg

SICK 6068090, Руководство по эксплуатации, Страница: 11 / 46

Поделиться
Скачать
SICK 6068090 Скачать руководство пользователя страница 11

5

Mounting

5.1

Required materials

You need the following additional materials to mount the device:

•

Grounded mounting rail (pre-assembled)

•

Pre-configured cable (max. 30 m) with M8 female connector (

see "Interfaces",

page 8

)

•

Pre-configured cable for Ethernet/IP with D-coded M12 male connector (

see "Inter‐

faces", page 8

)

•

One or more signal sources (e.g. WLL180T)

•

Small slotted screwdriver

5.2

Preparing mounting location

1.

Mount a grounded mounting rail in the same area as the application.

2.

Lay the two pre-assembled cables so that they can easily be connected to the con‐
nections of the device. If necessary, use cable channels, cable ties and cable
grips.

5.3

Scope of delivery

•

WI180C-EN

•

Quick start guide

5.4

Mounting procedure

1.

Carefully unpack the device.

1

2

2.

Clamp the device onto the mounting rail, as shown in the image.

3.

Clamp the series-connected devices onto the mounting rail as shown in their
mounting instructions.

MOUNTING 

5

8024950/2019-11-04 | SICK

O P E R A T I N G   I N S T R U C T I O N S | WI180C-EN

11

Subject to change without notice

Содержание 6068090















































Отзывы:

Нет отзывов