Operating the Sensor
32
© SICK AG • Subject to change without notice. • 8017035/ZMO9/2017-06-08
Setting
item
Bank Setting value/
default value
General description
Screen-
saver
N
Select the behavior of the display after 30 seconds without any operation.
Dark
Make the display backlight dark.
LCD Off
Turns OFF the display backlight. While the display backlight is OFF, the communi-
cation speed will get faster.
Brightness N
0 to 15
[
15
]
Adjust the screen’s brightness.
Initialize
—
Initialize the setting values to their factory default values.
All
Initialize the setting values of all banks and the common settings.
When you execute this operation, the sensor will automatically restart.
Bank
Initialize the setting values of the currently selected bank.
Version
—
Display the version of the sensor. (This information is only displayed.)
5.3
Setting
This section explains the setting items on the setting screen.
The setting screen has three sets of settings:
“Camera,” “Profile,” and “Area.”
While the setting screen is displayed, judgment output (control output)
is stopped and out-of-range analog current output is generated
(approximately 24 mA).
Table items marked with “Y” in the “Bank” column can be set for each
bank. In the same manner, items that have an “N” for their bank are
shared between all banks.
5.3.1
Camera
Use the camera settings to configure camera (sampling) conditions such as
the camera mode, the camera area, and the exposure condition in order to
match the measurement target and environment.
Camera screen
Camera items
You can use the camera settings to configure the following items.
