Sices HS 315, Техническое руководство

Страница: 95 / 255

Technical Handbook 77
The display has different display modes with various pages.
Mode Description Page identifier
PROGRAMMING Programming P.XX
PLC PLC L.XX
STATUS Status information S.XX
MEASURES Electrical measurements M.XX
ENGINE Engine measurements E.XX
HISTORY History logs H.XX
Generally, navigation between modes takes place via buttons UP and DOWN .
To view the pages within mode, use the buttons LEFT and RIGHT .
In some modes (P.XX and H.XX), press the ENTER button to view the pages, and then the
UP and DOWN buttons to navigate between pages.
If the UP and DOWN buttons must be used to manage the functions within the page, the
ENTER button must be pressed to activate the said functions, and the ESC/SHIFT button to
deactivate them.
HS315 can automatically hide some pages according to the configuration parameters of the
system.
From version 1.09, it is also possible to use the parameters P.0521, P.0522, P.0523 and
P.0524 to hide some pages from the display modes "L", "S", "M" and "E". These are bit-settable
parameters, where each bit corresponds to a specific page on the display. For example, setting
P.0522 to "000001" (bit 0 active) hides the page M.01.
Fig. 2 - Mode navigation