Sices D-PRO, Техническое руководство

Страница: 7 / 53

D-PRO Protection relay Technical Manual 1
1.
1.1
[1] SICES EAAM0495xx - D-PRO parameter tables.
[2] SICES EAAS0496xx
– D-PRO Modbus registers
[3] SICES EAAS0341xx
– Serial Communication.
[4] BOSCH CAN Specification
– Version 2.0 – 1991, Robert Bosch Gmbh
[5] CAN open
– Cabling and Connector Pin Assignment – CIA Draft Recommendation DR-
303-1
[6] SICES EAAP0457xx
– USB driver Installation Guide
[7] SICES EAAM046200IT
– Ethernet TCP/IP – Rapid Installation Guide.
[8] SICES EAAM00458xx
– BoardPrg 3.xx Software Manual
[9] EAAM0410xx
– SI.MO.NE User Manual.
1.2
Many accidents are caused by poor knowledge and the non-observance of safety regulations,
which must be observed when operating and/or servicing the machine.
Before using or servicing the machine, you should read, understand and observe the
precautions and warnings in this manual, in order to prevent accidents.
In order to identify the safety messages included in this manual, see the words listed below.
WARNING! This indication is used in the safety messages of the manual when
there are possible danger situations that may cause injuries or death if the danger is
not avoided.
This safety messages describe the normal precautions needed to avoid danger.
Ignoring this instructions may cause serious damages to things and/or people.
WARNING! This indication is used in the safety messages for dangers that, if not
avoided, may cause injuries, damages or malfunctioning.
The message can be also used only for few dangers that may cause damages to things
and/or people.
INFORMATION! This term indicates that the message provides useful information
forperforming the current operation, or for explanations or clarifications of procedures.