36
Use and Maintenance Manual ATS LOGICA CONTROL PANEL with ATS115
When storing the unit ensure that no other objects are put on top of the panel in order to avoid
damages and/or risks of an accidental fall.
The transportation of the electric panel must be carried out so as to safeguard its integrity.
Dimensions and weights are indicated on the Panel’s identification label and in the documentation
attached. (See chapter 10).
All floor standing carpentry over a certain weight is equipped by special rings to be lifted from the
high…
…and special base H:100 for the transportation from the bottom (traspallet).
On receipt of the Panel, check to see if there is any damage caused by transport and check to make
sure that the details indicated on the identification label correspond to what was requested.
If the panel is not installed immediately but stored, it is necessary to take some precautionary
measures in order to avoid damage to the external case and electrical components inside.
Store the packaged panel in a closed environment that covers and protects against weather
conditions and animals. The humidity level must be between 30 and 75% with temperatures between
-25°C and +55°C, and a maximum peak of 70°C for very short periods.
At the end of its life cycle or in case of demolition, the equipment has to be decommissioned
according to the norms in force in the Country of use. It is also required that the identification labels
and any other related document are appropriately destroyed.
