Network Video Recorder
Quick Start Guide
1
.
Notes
●
Please read this instruction carefully for correct use of the product and
preserve it for reference purposes.
●
All the examples and pictures used here are for reference only.
●
There may be several technically incorrect places or printing errors in
this manual. The updates will be added into the new version of this manual.
The contents of this manual are subject to change without notice.
●
This device should be operated only from the type of power source indicated
on the marking label. The voltage of the power must be verified before using
the same.
Please check the device and the accessories after getting the device. If there are
any damages, shortages or defects, please contact your dealer immediately.
2
.
Packing
Check
This series of the product supports 1 SATA hard drive. Please make sure that
the device is powered off before the installation. The pictures of the installation
are only for reference, please take the real object as the standard.
3
.
HDD
Installation
The interfaces of the rear panel are for reference only.
4. Rear Panel Instruction
5. Startup
&
Shutdown
7. Network Configuration
You must configure the wizard if you start the NVR for the first time. You can
skip the settings of wizard next time. The default username is
admin
and the
password is set by yourself when you configure the wizard for the first time.
Click “Start” and select “Login”. This will take you to see a login box. Input
default username and password you set and you can see the live image.
Important: Please Take Note of this password, Email and Secret Question
►Startup
①
Connect the monitor and the power.
②
The device will boot and the power indicator will display blue.
③
A wizard window will pop up.
►Shutdown
Go to “Main Menu” and then select “Shutdown” icon. This will bring up a
shutdown window. The device will shut down by clicking “OK” button.
Then disconnect the power.
6. Login
After you finish adding IP cameras, you can see the live images through the
monitor of the NVR. The following will mainly introduce how to add the IP
cameras via LAN/WAN.
►
LAN
①
Set the network of the NVR. Go to Start
→
Settings
→
Network
→
TCP/IPv4.
Input IP address, subnet mask, gateway, etc. If using DHCP, please enable DHCP
in both the NVR and the router.
②
Go to Start
→
Settings
→
Network
→
Port. Input HTTP port (the default
value is 80), server port (the default port is 6036).
③
Click “Apply” to save the settings.
①
Loosen the screws to open the cover.
②
Put
the
screws
into
the
HDD.
③
Place
the HDD onto the bottom
of the case.
④
Turn over the machine and secure
the HDD with the screws.
⑤
Connect the power and data cables.
⑥
Install the cover back and fix it.
Port
TCP/IPv4
DDNS
NAT
IP Address Settings
Obtain an IP address automatically
Ethernet Port 1 ( Online )
Obatin DNS server address automatically
IP Address
Preferred DNS
192 . 168 . 1 . 2
0 . 0 . 0 . 0
192 . 168 . 1 . 1
192 . 168 . 1 . 1
0 . 0 . 0 . 0
Subnet Mask
Alternate DNS
Gateway
UPnP
Network Status
④
Go to Start
→
Settings
→
Camera
→
Add Camera. The NVR will
automatically refresh the cameras searched. The IPC which supports the Onvif
protocol
be added manually. If the IPC searched is not in the same local
network as the
NVR, you should select the device and click to modify the IP
address.
4.0.0.1.beta1
Version
1
2
192.168.1.20
192.168.1.38
XXX
80
80
80
XXX
XXX
XXX
3.4.2
3.4.2
255
.
255
.
255
.
0
255
.
255
.
255
.
0
No.
IP Address
Edit
Port
Protocol
Model
Subnet Mask
3
192.168.2.45
XXX
XXX
255
.
255
.
255
.
0
Quickly Add
Manually Add
Add
Camera
Selected: 1/3
Add
Default Password
Remain
Bandwidth
:
108
/
120
Mb
Cancel
Mac Address
IP Address
Port
CE :98 :23 :75 :35 :22
Edit IP Camera
9008
192
.
168
.
1
. 45
255
.
255
.
255
. 0
admin
192
.
168
.
1
. 1
Subnet Mask
Username
Gateway
Password
OK
Cancel
⑤
Checkmark the device you want to add and then click “Add” button.The
NVR will automatically refresh the cameras and return to “Edit
Camera”
interface.
Username
Password
admin
Login
Enter Password
Display Password
Log In Automatically
Login
Edit
S
ecurity
Q
uestion
Cancel
