siat ProWrap 16_H_FM, Руководство по эксплуатации и обслуживанию

Страница: 9 / 104

IDM 510-004-5
Safety information
7
English language Operation and maintenance manual
– Ensure the area around the machine, especially the control post, is ALWAYS
unobstructed and in good condition to minimize the risks for the Operator.
– According to the type of operation to carry out, wear the Personal Protective
Equipment listed in the “Instructions for use” and that indicated by the Labour
laws.
– The non-compliance with the information provided herein may lead to risks
for the safety and health of the persons involved and may also lead to eco-
nomic damages.
▀
Safety Manager Obligations
– The safety manager must train the operator and help him or her familiarise and
interact with the machine in an independent, adequate and risk-free manner.
– The operator must be informed about the PROPER USE of the machine and
about the remaining RESIDUAL RISKS.
– The operator must demonstrate that he has acquired the relevant skills and has
understood the “User Instructions” in such a way as to carry out his activities
safely.
– The operator must be able to recognise the safety signals and demonstrate that
he is in suitable condition to carry out his assigned duties.
– The safety manager must release educational material to trainees and document
the delivered training, so as to be able to produce such documentation in case of
litigation.
Safety Warnings on Misuse
– ONLY trained, documented and authorized Operators are allowed to use the ma-
chine.
– DO NOT use or allow other persons to use the machine if the safety devices are
faulty, disabled and/or incorrectly installed.
– DO NOT use or allow other persons to use the machine for purposes and in ways
different from what specified by the Manufacturer.
– DO NOT use the machine in home environments.
– DO NOT wear clothes and/or accessories that could become caught in the mov-
ing or protruding parts.
– When operating the machine, ALWAYS wear the Personal Protective Equipment
specified by the Manufacturer and by the current regulations on safety at work.
– If troubles arise, do NOT continue to use the machine. Stop it immediately and
restart only after restoring the normal operating condition.
– DO NOT use the machine if the scheduled routine maintenance interventions
have not been carried out.
– DO NOT tamper with, override, bypass or eliminate the safety devices installed
on the machine.
– DO NOT modify the manufacturing and functional characteristics of the machine
in any manner whatsoever.
– DO NOT perform any interventions other than those specified in the Operation
Manual without the explicit authorization of the Manufacturer.
– DO NOT carry out any intervention when the machine is being operated. Stop the
machine and put it in safety condition before carrying out any intervention.
– DO NOT clean or wash the machine with water, steam or aggressive products
that might irreversibly damage the components.