siat ProWrap 16_H_FM, Руководство по эксплуатации и обслуживанию

Страница: 61 / 104

IDM 510-129-1
Reel holding carriage (PW)
59
English language Operation and maintenance manual
▀
Adjustment of drive chain tensioning
– The operation must be carried out by the maintenance technician or by
personnel with suitable competences, skills and knowledge.
Make sure to fulfil the required requirements in order to work under safe
conditions.
– This service should be carried out with the reel holding carriage lowered
and the machine safely at a stop.
1. Mark the intervention area and
prevent access to the devices
that, if activated, may cause
unexpected hazards and jeop-
ardize the safety level.
2. Loosen screws and remove
guard
A
.
3. Slightly loosen screws B .
4. Manually adjust the motor unit
C to regulate the tension of belt
D and, at the same time, tight-
en the screws
B
.
Important
Do not tighten component ex-
cessively in order to avoid the
deterioration of the rotating
parts.
5. Slightly loosen screws E .
6. Manually adjust the tightener F
to regulate the tension of belt G
and,at the same time, tighten
the screw
E .
Important
Do not overtighten so as not to
cause any malfunctioning.
7. Assemble the guard A , and
then fasten it by using the
screws.
–
At the end of operations,
check that there are no tools or other material near the moving parts or in
dangerous areas.
8.
Start the machine and make sure that the operation has been carried out proper-
ly.