siat ProWrap 16_H_FM, Руководство по эксплуатации и обслуживанию

Страница: 10 / 104

Safety information
IDM 510-004-5
8
English language Operation and maintenance manual
– DO NOT replace the components with non-genuine spare parts or other compo-
nents with different design and manufacturing specifications.
– DO NOT dump in the environment any materials, polluting liquids and mainte-
nance waste generated during the operations. Dispose of them according to the
regulations in force.
– DO NOT leave the machine unattended during operation and DO NOT leave it at
the end of the work without stopping it to safety conditions.
–
The non-compliance with the information provided herein may lead to risks
for the safety and health of the persons involved and may also lead to eco-
nomic damages.
Safety Warnings on Residual Risks
Residual risks: all the risks remain even if all the safety solutions have been
adopted and integrated when the machine has been designed.
– Upon designing and building the machine, the Manufacturer has paid particular
attention to the RESIDUAL RISKS that may affect the safety and health of the
Operators.
– For specific information about residual risks, please refer to the machine user
manual.
Safety Warnings for Maintenance and Adjustments
– Always keep the machine in optimum operating condition and carry out the rou-
tine maintenance according to the intervals and procedures specified by the Man-
ufacturer.
– A good maintenance will ensure a stable performance over time, longer
working life and constant compliance with the safety requirements.
– The personnel authorized to carry out the ordinary maintenance must have qual-
ified expertise and specific skills in the field of intervention.
– Any work on the electrical system must ONLY be performed by technicians with
acknowledged, field-specific skills.
– Mark the intervention area and prevent access to the devices that, if activated,
may cause unexpected hazards and jeopardize the safety level.
– According to the type of operation to carry out, wear the Personal Protective
Equipment listed in the “Instructions for use” and that indicated by the Labour
laws.
– Respect the SAFETY WARNINGS. Avoid any IMPROPER USE of the machine
and assess the RESIDUAL RISKS.
– Before carrying out any intervention, activate all the safety measures, and assess
any residual energy which may still be present.
– Carry out the operations in areas which are difficult to access or hazardous ONLY
after disconnecting all power sources.
This operating mode is necessary in order to work under safe conditions.
– Carry out the operations according to the procedures and modes shown by the
Manufacturer in the “Instruction Manual”.
– All operations must be carried out ONLY with suitable tools which shall be in good
condition, in order to avoid damaging any components and parts of the machine.
– Replace the components and/or safety devices ONLY with original spare parts in
order not to alter the required safety level.