OPTIMA
50
ASSEMBLY INSTRUCTIONS
Button
Short flush
Long flush
Optional escutcheon
(not always supplied)
Button nut
Dead water
sliding valve
Strainer
Strainer nut
Pan gasket
Strainer gasket
Valve gasket
Overflow
Réf. 50 5531 00 B
a
b
c
e
f
g
h
i
j
l
Short
flush cursor
k
Cable
d
N 50
N 100
GB
Страница 1: ...hort flush Long flush Optional escutcheon not always supplied Button nut Dead water sliding valve Strainer Strainer nut Pan gasket Strainer gasket Valve gasket Overflow Réf 50 5531 00 B a b c e f g h i j l Short flush cursor k Cable d N 50 GB ...
Страница 2: ...N Position the mechanism in the cistern and secure it in place with the nut g Manually screw the flush valve nut g until it is in contact with the ceramic If necessary give an extra quarter turn maximum with the appropriate spanner NB Excessive tightening can damage the mechanism and would not be covered by the guarantee Bottom of cistern Wall of bowl Conical seal Hexagon nut Washer Wing nut Washe...
Страница 3: ...from its strainer Change the valve gasket Reposition the mechanism locking it into the strainer Close the cistern again Valve gasket Strainer Once the set up has been completed place button a on lid and screw button nut c if the hole in the lid D is 38 mm and 45 mm remove the escutcheon b Clip cable case Place lid back on top of cistern ...
Страница 4: ...justment screw Filter Membrane Membrane Manually screw the backnut until it is in contact with the ceramic If necessary give an extra quarter turn maximum N B Excessive tightening can damage the mechanism and would not be covered by the guarantee Ensure tightness of connection to cistern with filter gasket WARNINGS 1 Do not overtight in any case 2 Do not use any sealing paste and or compound in an...
