Si-tex SP38, Инструкция по установке и эксплуатации, Страница: 97 / 193

Sitex SP38 Installation and Operation Getting Started
Document PN 29010101 V1r0
- 97 -
AP Network
Linking all SP38 (N2K) devices to a N2K network, there are three sub-menus:
Advanced (Advanced AP Inst Group)
Allows the user to configure specific devices on the network.
For most devices the only options will be “Set PGN Update Rates” and “Device Info”
 The first option will retrieve a list of PCNs’ emitted by that device and allow a user
to request changes to the rate of emittance of a given PGN through a menu.
 The second option will display some basic information on the device, such as the
Model ID, Serial, and Software Version
For some proprietary Sitex devices, the options “Compass Constants”, “Cal. Compass”,
“Compass Settings”, “Compass Attitude Biases”, and “0183 Port Configuration” will also
appear. These allow for advanced configuration of those devices.
Verify Installation
•
Displays Sitex items available on the N2K Network.
AP Network sub-menu
AP Inst Group
There are four Distance Units: m (Meter), Km (Kilometer/second), mil (mile/second), nm
(nautical mile/second)
Linked SPU
Allows users to select one SPU from multiple SPUs on the N2K network. Please note that
the screen will show all the devices on the N2K Network, you must then select the device
with “Sitex SPU.” Selecting a device which is not SPU, will show an error message.
Data Sources
Allows users to choose Heading and Navigation Data Source that are on the N2K
Network for use in AUTO and NAV mode. There are nine choices of modifiable Data
Sources:
1. SPU (Signal Processor Source) Source
2. RFU (Rudder Follower Source) Source
3. HDG (Heading) Source
 Sitex GNSS GPS Compass is under this category.
 Sitex SSRC Compass is also under this category.
4. NAV (Navigation) Source