Si-tex SAS-600, Инструкция по установке и эксплуатации, Страница: 53 / 78

Operation
Page 50
SOG vectors can also be displayed on the screen if this item is selected from
the
‘Options’ menu.
Some of the layers displayed on the chart can be removed to provide more
clarity on the display. The ‘
Chart Settings’ screen provides a way of modifying
these.
The chart feature is an aid for the display of information only and should not
be used for vessel navigation.
4.6.10 Help and support screen
This screen is available from the ‘Home’ > ‘System Settings’ menu and
provides contact information for the product manufacturer.
It also provides relevant information from the User Manual.
4.6.11 User settings screen
From this screen, it is possible to set the display brightness, set the display to
a day or night colour scheme, and configure the sounds emitted by the device.
It is also possible from this screen to set the UTC time offset, change the filter
settings and display the menus in a number of non-English languages.
4.7 Configuring vessel information
4.7.1 Pre-configuration checks
To proceed with configuration the steps in Section 3. should already have
been completed.
4.7.2 Configuring vessel identification information
The AIS transceiver must be configured with information about the vessel on
which it is installed prior to operation. The following information is required to
be entered in the
‘Home’ > ‘system settings’ > ‘Vessel data settings’ menu:
● MMSI - Vessel MMSI number, this can usually be found on the ships
VHF radio license and should be the same MMSI as used for the
VHF / DSC radio.
● Ship name (limited to 20 characters)
● Callsign - Vessel radio call sign (limited to 7 characters)