Si-tex SAS-600, Инструкция по установке и эксплуатации, Страница: 33 / 78

Installation and configuration
Page 30
It is important to ensure that the equipment is configured to use the matching
baud rates.
3.4.2 Sensor configuration
For more complex installations the AIS transceiver has six NMEA0183
(IEC61162-1/2) data ports for connection of ship’s sensors and display
equipment as described in Table 2. and Table 3.
There are three input only ports for ship’s sensor data and three bi-directional
high speed ports for connection of display equipment. These can be
connected using an accessory cable pack purchased through your dealer.
3.4.3 Data input ports (14 way connector)
Figure 12 Serial input port connection
14 way interface
connection