Si-tex SAS-600, Инструкция по установке и эксплуатации, Страница: 12 / 78

Notices
Page 9
1 Notices
When reading this manual please pay particular attention to
warnings marked with the warning triangle symbol shown on the
left. These are important messages for safety, installation and
usage of the AIS transceiver.
1.1 Safety warnings
This equipment must be installed in accordance with the instructions
provided in this manual. Failure to do so may seriously affect its
performance and reliability. It is strongly recommended that a trained
technician installs and configures this product.
This product must be connected to protective ground via the ground
connection point. It is essential that the ground connection point is
used in all installations, regardless of what other equipment is
connected. The ground connection point must be bonded to
protective ground using as short a connection as possible.
This equipment is intended as an aid to navigation and is not a
replacement for proper navigational judgement. Information provided
by the equipment must not be relied upon as accurate. User decisions
based upon information provided by the equipment are done so
entirely at the users own risk.
Do not install this equipment in a flammable atmosphere such as in
an engine room or near to fuel tanks.
It is recommended that this product is not installed in direct sunlight or
under a windshield where it may be subject to excessive solar
heating.
!
!
!
!
!
!