SHX SHX15HL2002, Руководство пользователя

Страница: 16 / 20

Seite 16 von 20

Use the and buttons to set the time.

You can choose between 1 - 24 hours.
SWING

Press the button to activate the pan function.

To switch off the function, press the button again.

This function directs the blown air to the left / right.
SAFETY MEASURMENTS
The SHX fan heater is equipped with protective devices that protect the device and are
designed to prevent a fire.
Please note that neither mechanism is an auto stop or other comfort function. Always switch
the device off, pull out the mains plug and wait until the heater cools down before you move,
clean or store the device.
Overheat protection
If there is any risk of overheating (e.g. when device is covered) the overheat protection
switches off the device.
As soon as the device cooled down it turns back on automatically and continues operating as
before.
WARNING
A common cause of overheating are deposits of dust or lint in the device. Therefore, clean
the device regularly and remove these deposits with a vacuum cleaner.
Tip-protection
As soon as the device is tilted a few degrees from its vertical position, if you lift the device or
accidentally knock it over, the anti-tip device releases and the device switches off.
CLEANING INSTRUCTIONS
Before cleaning the device, switch off the heater, pull out the mains plug and then wait
until the device has completely cooled down.
Cleaning the housing:

Clean the device with a soft, moderately damp cloth and then wipe it with a dry cloth.
WARNING

Do not dip the device in water or splash it with any other liquid.

Do not use gasoline, alcohol or solvents for cleaning the device.

Do not spray insecticides or similar means on the device.

Do not use the device in rooms with high humidity.

Do not cover the device
– risk of fire!