Shuttle PN18, Руководство пользователя

Страница: 32 / 44

29
2.7 Access Point
In access point mode, the XPC 802.11b/g Wireless Kit will func-
tion as an access point. This allows you to set up your wireless
networks without using a dedicat ed AP device. Up to 16 wireless
stations can associate to the
XPC 802.11b/g Wireless Kit.
To use the XPC 802.11b/g Wireless Kit to bridge your wired and
wireless network, the following requirements must be met :
1. The XPC 802.11b/g Wireless Kit must be installed on a com-
puter connected to the wired network.
2. Eit her configure net work sharing (refer to the appendix for an
example) or bridge the two interfaces (wireless and wired) on the
computer.
3. Set the wireless station’s IP address to be in the same subnet
as the computer in which the XPC 802.11b/g Wireless Kit is
installed. Refer to Configuring the Wireless Station Comp-
uter.
Select the Access Point mode, and you will see the following figure.