manualshive.com logo in svg

Shuttle FB83, Руководство пользователя


Поделиться
Скачать
background image

- 15 -

Step 4

Install Internal Peripherals in System Case

Before you install and connect the mainboard into your system case, we rec-
ommend that you first assemble all the internal peripheral devices into the com-
puter housing, including but not limited to the hard disk drive (IDE/HDD), floppy
disk drive (FDD), CD-ROM drive, and ATX power supply unit. This will greatly
facilitate in making the connections to the mainboard described below.

To install IDE & FDD drives, follow this procedure:
1. Set the required jumpers on each device according to the instructions pro-

vided by the manufacturer. (IDE devices, HDD, and CD-ROM, have to set
jumpers to Master or Slave mode depending on whether you install more
than one device of each kind.)

2. Connect IDE cable and FDD cable on the back-panel of the internal periph-

eral devices to the corresponding headers on board.  Note that the cable
should be oriented with its colored stripe (usually red or magenta) connected
to pin#1 both on the mainboard IDE or FDD connector and on the device as
well.

3. Connect an available power cable from your system power supply unit to

the back-panel of each peripheral device.  Note that the power cable is di-
rectional and cannot fit in if not properly positioned.

Содержание FB83


















































































Отзывы:

Нет отзывов

Похожие инструкции для FB83

Microsemi VSC8584 User Manual preview
VSC8584
Бренд: Microsemi Страницы: 15
Tews Technologies TVME220 Series User Manual preview
TVME220 Series
Бренд: Tews Technologies Страницы: 26
Texas Instruments TPA3132D2EVM User Manual preview
TPA3132D2EVM
Бренд: Texas Instruments Страницы: 8
JETWAY M26GT4SVM User Manual preview
M26GT4SVM
Бренд: JETWAY Страницы: 19
C&T Solution G03-NF9G- Technical Manual preview
G03-NF9G-
Бренд: C&T Solution Страницы: 48
Microchip Technology ADM00805 User Manual preview
ADM00805
Бренд: Microchip Technology Страницы: 45
DFI SD330-H110 User Manual preview
SD330-H110
Бренд: DFI Страницы: 76
Advantech AIMB-742 User Manual preview
AIMB-742
Бренд: Advantech Страницы: 124
JETWAY 845D PRO User Manual preview
845D PRO
Бренд: JETWAY Страницы: 48
SOYO SY-P4I845GV Quick Start Manual preview
SY-P4I845GV
Бренд: SOYO Страницы: 44
Suzuki GF60A Service Manual preview
GF60A
Бренд: Suzuki Страницы: 336
SOYO TechAID Manual preview
TechAID
Бренд: SOYO Страницы: 3
Sleipner SE-IP100 Installation Manual preview
SE-IP100
Бренд: Sleipner Страницы: 28
Lex Computech 2I385PW Manual preview
2I385PW
Бренд: Lex Computech Страницы: 96
Lex 3I525D Manual preview
3I525D
Бренд: Lex Страницы: 80
Commell P4ELA User Manual preview
P4ELA
Бренд: Commell Страницы: 58
Commell LV-6715 User Manual preview
LV-6715
Бренд: Commell Страницы: 33
Commell LV-67B User Manual preview
LV-67B
Бренд: Commell Страницы: 48

Бренды по названию

Популярные бренды

Загрузить еще бренды