background image

- 9 -

AK37GT/AK37GTR mainboard is carefully designed for the demanding PC user who
wants high performance and maximum intelligent features in a compact package.

2.1 Specifications

-

 CPU Support

Support Socket462 package CPU.
AMD  Athlon Processor with 200/266 MHz FSB
AMD Duron Processor with 200/266 MHz FSB
AMD Athlon XP Processor with 266 MHz FSB

-

 Chipset

Features VIA KT400, VT8367 N.B. and VT8233A S.B..
KT400, Integrated high performance DDR DRAM controller.

-

 Jumperless CPU Configuration

Soft-configuration FSB (The FSB speed is software configurable from 100MHz
to 200MHz by 1MHz step in the Frequency/Voltage Control of BIOS setup
program.)

-

 On Board Multi-Channel Hardware Audio Controller

Support 5.1 speakers, C3DX positional audio in 6 CH speaker mode.
HRTF-3D positional audio, supporting Direct Sound 3D and A3D interface.
Legacy SBPRO compatible.

-

 On Board IDE RAID Controller (AK37GTR only)

Support RAID 0, RAID 1 function.

-

 Versatile Memory Support

Four 184-pin DIMM slots to support up to 4GB of PC1600, PC2100, PC2700
or PC3200, compliant DDR SDRAM module.

-

 PCI Expansion Slots

Provides six 32-bit PCI slots.

-

 AGP Expansion Slot

Provides one 32-bit AGP slot which supports up to 4X/8X AGP device.

2 FEATURES

Содержание AK37GT
























































































Отзывы: