manualshive.com logo in svg
background image

VA300-C Console (cont’d)

Power Supply  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

120 volts, 60 Hz.

80 watts maximum with no signal in.

180 watts with 1 KHz. signal and 100 watts output

400 watts maximum operating

-7°C to 43°C (20°F to 110°F) without derating

Power Consumption  . . . . . . . . . . . . . . . . . . .

Ambient Temperature Range

. . . . . . . . .

Dimensions

. . . . . . . . . . . . . . . . . . . . . . . .

213 mm height x 635 mm width x 375 mm

depth (8-3/8 in. x 25 in. x 14-3/4 in.)

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17.25 kg (38 Ibs.)

VA300-S Speaker Column

Power Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 watts

Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 ohms

Frequency Response

. . . . . . . . . . . . . . . . . . . . . . . .

Horizontal Distribution

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50 Hz. to 10,000 Hz.

1 4 0 °

Vertical Distribution

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6 5 °

Dimensions

. . . . . . . . . . . . . . . . . . . . . . . . . . .

1594 mm height x 400 mm width x 222 mm

depth (62-3/4 in. x 15-3/4 in. x 8-3/4 in.)

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31.78 kg (70 Ibs.) including cable

DESCRIPTION

The Shure Model VA300 Vocal Master Sound System con-

sists of one Control Console (VA300-C) and two Speaker

D e s i g n e d   s p e c i f i c a l l y   f o r   t h e   p e r f o r m i n g   v o c a l i s t ,   t h e

Columns (VA300-S).

VA300 Vocal Master Sound System provides the required
portability, flexibility, and dependability demanded by profes-

sional entertainers.

The VA300-C mixer/power amplifier Console permits the

user to mix up to six microphones with individual control over

volume, tone and reverberation. A solid-state 100 watt R.M.S.

power amplifier is incorporated in the Console. Unique cir-
cuitry design protects the solid-state components against dam-

age as a possible result of open-circuit or short-circuit condi-

tions of the amplifier outputs. The output transistors are also

protected against overheating by the use of automatic thermal

sensors. All components of the VA300 Vocal Master Sound

System are conservatively rated and are operated well within

their respective tolerances to assure long life and trouble-free

The VA300-C is Underwriters Laboratories, Inc. listed, and is

listed by the CSA Testing laboratories as certified.

performance.

The VA300-S Speaker Columns are highly directional, wide

range, line-radiators. A rear-ported enclosure is utilized which
contributes to the directional characteristics of the Speaker

Column and is crucial in reduction of feedback.

The VA300-S employs four special 8-inch loudspeakers and

two special 10-inch loudspeakers providing a total cone area of
2,310 cm² (358 in²).

Each Speaker Column is furnished with a 15m (50 ft) #18

gauge, 2-conductor rubber jacketed cable with locking phone
plugs attached.

3

Содержание Vocal Master VA 300






















Отзывы: