Shure Incorporated
62/103
5.
6.
7.
8.
9.
•
•
•
•
•
•
•
•
Open the Device Properties for the adjacent APT2 or APT4.
Set the unit to Mode B (
Device
Propterties
>
RF
Mode
Settings
>
RF
Coordination
Mode
).
Select Add Updates to save the setting and close the window.
Make sure any additional APTs are set to alternating RF Coordination modes.
Select Apply All button on the Utility page to update all device settings.
Networking
Networking Best Practices
Use the following best practices when setting up a network to ensure reliable communication:
Always use a "star" network topology by connecting each component directly to the switch or router.
Connect networked MXW gear to the same network and set to the same subnet. This ensures best system performance
and maximum microphone count.
Use only 1 DHCP server per network. Disable DHCP addressing on additional servers.
Power on the switch and DHCP server prior to MXW equipment.
To expand the network, use multiple Ethernet switches in a star topology.
Connect each device directly to the port of an Ethernet switch. Avoid "daisy-chaining" Ethernet port connections between
devices for larger networks.
Do not loop network connections.
All devices must be at the same firmware revision level.