Shure Microflex MXWANI4 Скачать руководство пользователя страница 18

Страница: 18 / 103

Shure Incorporated

18/103

◦

•

Monitors the charge status of the connected microphone in increments of <10, 10, 25, 50, 75, 100% (see Batteries for more

detail). Additionally, the five LEDs flash for several seconds when the microphone has been successfully linked to the chan

nel.

⑥

Locking DC Power Supply

Secures the PS60 power supply to the input jack of the station.

⑦

Power Switch

Powers the unit on or off.

⑧

Ethernet Port

Connects to the MXW System network through an MXW Audio Network Interface or a switch using an Ethernet cable.

⑨

Ethernet Status LED (Green)

Off = no network link.

On = network link established.

Flashing = network link active.

⑩

Ethernet Link Speed LED (Amber)

Off = 10 Mbps

On = 100 Mbps

Connecting Microphones

Place a microphone in the charger by connecting it to one of the channel slots. The channels in the top row have two USB

ports to accommodate different types of microphones. Do not attempt to connect to both USB ports at the same time.

Note: 2-channel chargers do not support gooseneck microphones.

Handheld, boundary and bodypack: use the main vertical slots in the recessed bays.

Gooseneck base: uses the top row's horizontal connectors.

Different Connectors for the Same Channel

Microphone Transmitters

Description

①

Power Button

Содержание Microflex MXWANI4








































































































Результаты поиска

Содержание Microflex MXWANI4

Отзывы:

Shure Microflex MXWANI4, Руководство пользователя, Страница: 18 / 103

Результаты поиска

Содержание Microflex MXWANI4

Отзывы: