Shure Microflex MXCW Скачать руководство пользователя

Страница: 15 / 86

Shure Incorporated

15/86

1.
2.

Securing the Microphone to the Conference Unit

Insert the microphone into the microphone connector.

Insert the 1.5 mm hex wrench into the hole next to the microphone on the conference unit and turn counterclockwise.

Using the Conference Units

Once a unit has powered on, tap the touchscreen to access the home screen, or insert a preprogrammed NFC card if avail

able.

Use the navigation pane to move between menus for different options and information on the MXCW640.

Home screen: Displays a combined speaker and request list.

Voting menu (chairperson only): Chairpersons can set up and monitor voting sessions.

Settings menu: View battery status, hide status bar, change brightness, and change screen language.

Chairperson control buttons (chairperson only)

Technician Menu

Additional conference unit information and settings are in the technician menu. To access the menu:

Tap the

gear icon to enter the settings menu.

While at the top of the settings page, hold down on both volume control knobs and tap on the right side of the touch

screen.

From this menu you can access 4 different screens to perform the following actions:

Содержание Microflex MXCW























































































Результаты поиска

Содержание Microflex MXCW

Отзывы:

Похожие инструкции для Microflex MXCW

Бренды по названию

Популярные бренды

Shure Microflex MXCW, Руководство пользователя

Результаты поиска

Содержание Microflex MXCW

Отзывы:

Похожие инструкции для Microflex MXCW

Бренды по названию

Популярные бренды