Shure Incorporated
27/101
•
•
•
•
•
•
•
•
Limiting cable runs to ≤100 m between devices.
Same firmware version* for all devices in your system
Ensure MXCW components and the PC are on the same network and set to the same subnet.
Tip:*
Keep the system upgraded to the latest available firmware version to ensure proper system compatibility and take advan
tage of new features. See
Firmware Updates
for more information.
Mount the Access Point Transceiver
The directional antennas of the access point send and receive the RF signal in a cardioid pattern with the greatest sensitivity
toward the face of the device. Always aim this side toward the microphone coverage area.
Select a Location for the Access Point
The access point is typically mounted to a ceiling or wall near the microphone coverage area.
Use the following best-practices when selecting a location for the device:
Direct the face of the access point toward the intended microphone coverage area.
Position the access point so there is nothing obstructing a line of sight to the microphones.
Keep the device away from large metal objects.
Keep at least eight feet between access points.
Mount with the reset button accessible, as it may be useful for troubleshooting.
Содержание Microflex Complete Wireless MXCW
Страница 16: ...Shure Incorporated 16 101 Right Button Icons...