Shure Incorporated
26/101
2.
◦
◦
•
•
•
•
•
•
•
•
Place the charger in storage mode:
From the hardware:
Press and hold the
Storage mode
button for 5 seconds.
From the software:
Open the charger web application to the home page and turn on storage mode.
Installation
Additional Equipment
Network Cables
Use shielded Cat5e (or higher) Ethernet cables, limiting cable runs to 100 meters maximum
between network devices.
Audio Cables
Balanced XLR cables to use analog input/output from the access point.
Gigabit DHCP Router (sys
tems with >1 APT)
A DHCP router is recommended to connect multiple access points in the same installation.
Ensure that it meets the following requirements:
Gigabit ports
Provides Class 0 PoE with at least 6.5W (for powering the MXCW access point)
Quality of Service (QoS) with 4 queues
Diffserv (DSCP) QoS, with strict priority
If the router features Energy Efficient Ethernet (or Green Ethernet), ensure it is disabled
from the ports dedicated for the MXCW system.
Recommended: A managed switch to provide detailed information about the operation
of each network link: port speed, error counters, bandwidth used, etc.
Requirement Checklist
Make sure your equipment meets these requirements before installing the system:
Use shielded Cat 5e or higher Ethernet cables.
Use Gigabit networking equipment between network audio devices.
Содержание Microflex Complete Wireless MXCW
Страница 16: ...Shure Incorporated 16 101 Right Button Icons...