Shure Microflex Complete Wireless MXCW, Полное руководство пользователя, Страница: 22 / 101

Shure Incorporated
22/101
◦
◦
◦
◦
◦
◦
◦
1.
③
Charging Status LEDs
Each charging slot has 5 LEDs that illuminate to show the battery's charge level:
LED % Battery Charge
1
Flashing: <10%
Solid: >10%
2 >25%
3 >50%
4 >75%
5 >95%
Charging error details are available in the web application and the full online system guide at pubs.shure.com
④
Power Button
Flip the switch to turn the unit on or off.
⑤
Power Input
Connect to the included power supply.
⑥
Ethernet Port
Connect to an Ethernet network to enable remote monitoring from the web application.
⑦
Reset Button
Press and hold to reset the device to default settings. The length of the button press determines the type of reset:
Network reset: Press and hold for 4 seconds to reset any network settings and refresh the network connection.
Factory default settings: Press and hold for 8 seconds to reset the device to factory default settings.
⑧
Ethernet Link Speed LED (Amber)
Off = 10 Mbps
On = 100 Mbps
⑨
Ethernet Status LED (Green)
Off = No network link
On = Network link established
Flashing = Network link active
⑩
Storage Mode Button
Press to preserve battery health for batteries being stored for an extended period of time.
Powering On the Device
Connect the device to a power source using the supplied power cable.