Shure IntelliMix Room, Руководство пользователя

Страница: 5 / 13

Shure Incorporated
5/13
•
•
◦
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1.
2.
3.
Turn off automatic Windows updates.
Use the high performance power plan in Power Options.
Make sure this plan uses active cooling in the advanced power options.
Disable all Sleep and Hibernate settings.
Disable network throttling.
Additionally, follow these system best practices:
Reboot the computer regularly.
Disconnect unused USB devices.
Remove software with high CPU loads, such as games or streaming apps.
Make sure the computer's BIOS is updated.
Check that Ethernet, Wi-Fi, and display drivers are updated.
Choosing Networks for Shure Control and Dante Audio
This software sends 2 types of data over the network: Shure control data and Dante audio data. You can use the same NIC
(network interface card) for both, or use 2 different NICs to separate the traffic.
During installation, you will be asked to choose a network for each one.
Shure control NIC:
Choose the network that Designer uses.
Used for device discovery and control
Dante audio NIC:
Choose the same network as other Dante devices to send audio between devices.
Cannot use Wi-Fi
Used to carry Dante digital audio
To change the NICs after installation, click the IntelliMix Room icon in the system tray of the computer running IntelliMix Room.
To change Designer's NIC, go to Settings.
Discovering IntelliMix Room in Designer
Each installation of IntelliMix Room appears as a separate device in Designer. Each installation's name matches the
computer's network name.
To find any online installations:
Go to Online devices.
Use the checkboxes to select IntelliMix Room installations and add them to locations.
If you can't find some installations:
Go to the computer that won't appear in Designer.
Click the IntelliMix Room icon in the system tray.
Make sure IntelliMix Room is using the same Shure control NIC (network interface card) as Designer.
Note: IntelliMix Room doesn't show up in Shure Update Utility or Shure Web Device Discovery.